Omron FHV Series - Page 48

Procedure Description Reference
Scene Editing In the Main Window (layout 0), edit
the measurement flow.
• Register processing items.
• Set the properties for each proc-
essing item.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Click Data save. Vision System FH/FHV/FZ5 series
User's Manual
↓↑
Testing Execute test measurements.
(In the Main Window (layout 0),
click Measure.)
Vision System FH/FHV/FZ5 series
User's Manual
↓
Adjust the parameters for each
processing item.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Click Data save. Vision System FH/FHV/FZ5 series
User's Manual
↓
Measuring
(Operation)
In the Main Window (layout 0), click
Switch layout, and then select
Main Window (Layout 1).
Vision System FH/FHV/FZ5 series
User's Manual
↓
In the Main Window (layout 1),
check the communications with the
PLC.
Vision System FH/FHV/FZ5 series
User's Manual
↓
In the Main Window (layout 1), exe-
cute commands from the PLC,
such as measurement trigger com-
mands.
Vision System FH/FHV/FZ5 series
User's Manual
↓
Management and Analysis Save and analyze measurement
data and images.
Vision System FH/FHV/FZ5 series
User's Manual
2 Overview of FHV Series
2 - 8
FHV Series Smart Camera Setup Manual (Z408-E1)