Controlling Operation and Outputting Data with TCP No-protocol Communications
416
FQ2-S4 User’s Manual
● CLRERR
Clear Errors
This command clears the error output status (error output and error indicator).
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
● DATASAVE
Save Settings
This command saves the current system data and scene groups to the Sensor.
<Command Format>
<Response Format>
When the Command Is Processed Normally
When the Command Is Not Processed Normally
CL
CR
RE RR
Command
Delimiter
CR
OK
Delimiter
CR
ER
Delimiter
DA
CR
TA ASEV
Command
Delimiter
CR
OK
Delimiter
CR
ER
Delimiter