Omron FQ2-S4 - Page 530

External Reference Parameters
528
FQ2-S4 User’s Manual
*1: To acquire the detected text string, use the ITEMDATA2 command.
1583+N
× 2 (N = 0
to 3)
Verification con-
ditions
Verification begin-
ning digit 29N
Setting/Acquisition 1 to 32 1 --- ---
1591+N
× 2 (N = 0
to 3)
*1
Master data 29N Setting/Acquisition 32 characters max. --- ---
1601 Reference unit
number 30
Setting/Acquisition −1: OFF,
0 to 31
−1
1602+N
× 2 (N = 0
to 3)
Verification end
digit 30N
Setting/Acquisition 1 to 32 32 --- ---
1603+N
× 2 (N = 0
to 3)
Verification begin-
ning digit 30N
Setting/Acquisition 1 to 32 1 --- ---
1611+N
× 2 (N = 0
to 3)
*1
Master data 30N Setting/Acquisition 32 characters max. --- ---
1621 Reference unit
number 31
Setting/Acquisition −1: OFF,
0 to 31
−1
1622+N
× 2 (N = 0
to 3)
Verification end
digit 31N
Setting/Acquisition 1 to 32 32 --- ---
1623+N
× 2 (N = 0
to 3)
Verification begin-
ning digit 31N
Setting/Acquisition 1 to 32 1 --- ---
1631+N
× 2 (N = 0
to 3)
*1
Master data 31N Setting/Acquisition 32 characters max. --- ---
2000 Measurement
result
Number of read
characters on line 1
Acquisition only 0 to 32 0 --- ---
2001 Number of read
characters on line 2
Acquisition only 0 to 32 0 --- ---
2002 Number of read
characters on line 3
Acquisition only 0 to 32 0 --- ---
2003 Number of read
characters on line 4
Acquisition only 0 to 32 0 --- ---
2100 Read character
string on line 1
Acquisition only 32 characters max. --- --- ---
2101
*1
Read character
string on line 2
Acquisition only 32 characters max. --- --- ---
2102
*1
Read character
string on line 3
Acquisition only 32 characters max. --- --- ---
2103
*1
Read character
string on line 4
Acquisition only 32 characters max. --- --- ---
2500+N
(N= 0 to
127)
Individual read
character
Acquisition only 1 character --- --- ---
3000+N
(N= 0 to
127)
Individual similarity Acquisition only 0 to 100 0 --- ---
3500+N
(N= 0 to
127)
Individual stability Acquisition only 0 to 100 0 --- ---
External
refer-
ence
number
Category Data name Setting/Acquisition Data range Default Expres-
sion text
string
Logged
data/
Judge-
ment
parame-
ter