5
Functions of the NT31/NT31C
Section 1-2
Rapid System Program & Screen Data Changes Possible Using a Memory Unit.
S Installing a memory unit (type NT-MF261) on the rear of the NT31/NT31C
makes it easy to write screen data into the NT31/NT31C on site. This enables a
rapid response to setup changes.
S NT31/NT31C can store a system program into a memory unit. This enables the
system to handle more flexible setups.
Screen Data Check Function
S Screen data can be checked simply by operations at the NT31/NT31C system
menu, without connecting up to the Support Tool.
Increased Screen Data Capacity
S The data capacity of 1 MB is twicethat of the NT30/NT30C, enablingstorage ofa
larger quantity of screen data.
Large Increase in Maximum Number of Registered Elements
S The number of elements that can be registered on one screen has been consid-
erably increased, making it possible to create more expressive screens. For de-
tails, refer to “Display Restrictions” (page 644).
Binary Data can be Read to/Written from the Host
S It is now possible to write binary data stored in words at the host directly to the
NT31/NT31C. This makes data conversion by a program at the host unneces-
sary, reducing the load on the host.
Character Display Using High Definition Fonts
S Any quadrupled characters are displayed with a 32 dot high--definition font.
Simple Version Upgrades
S By using the system installer supplied with the Support Tool (Type NT--
ZJ3MX1/ZJCMX1--EV3), the system program at the NT31/NT31C can be
changed easily from a personal computer.
Complies with International Standards
S The NT31/NT31C meets UL/CSA standards and EC directives.
To Next Page
Loading...
Need help?
General
