9 Troubleshooting
9 - 18
NX-series Digital I/O Unit User’s Manual (W521)
Event name Event Log Cleared Event code 9040 0000 hex
Meaning The event log was cleared.
Source Depends on where the Support
Software is connected and the
system configuration.
Source details NX Unit Detection
timing
When
commanded
from user
Error
attributes
Level Information Log category Access
Recovery ---
Effects
User program
Continues. Operation Not affected.
Sys-
tem-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Correction Prevention
The event log was cleared by the
user.
--- ---
Attached
information
Attached information: Events that were cleared
1: The system event log was cleared.
2: The access event log was cleared.
Precautions/
Remarks
None
To Next Page
Loading...
