1 - 19
1 Features and System Configuration
NX-series Digital I/O Unit User’s Manual (W521)
1-5 Support Software
1
1-5 Support Software
The Support Software that is used depends on the system configuration.
z Support Software for a System Configured with a CPU Unit
If your system is configured by connecting an NX Unit to a CPU Unit, the Sysmac Studio is used as
the Support Software.
z Support Software for a System Configured with a Slave Terminal
If your system is configured by connecting an NX Unit to a Communications Coupler Unit, refer to
the user’s manual for the Communications Coupler Unit for information on the Support Software.
Refer to A-7 Version Information with CPU Units on page A-158 or A-8 Version Information with Com-
munications Coupler Units on page A-160 for information on the Support Software versions.
To Next Page
Loading...
