Omron NX-ID - Related Manuals

27
Related Manuals
NX-series Digital I/O Unit User’s Manual (W521)
Related Manuals
The following table shows related manuals. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
NX-series Digital I/O
Units User’s Manual
W521 NX-ID
NX-IA
NX-OC
NX-OD
NX-MD
Learning how to
use NX-series Dig-
ital I/O Units
The hardware, setup methods, and
functions of the NX-series Digital I/O
Units are described.
NX-series Data Refer-
ence Manual
W525 NX- Referencing lists of
the data that is
required to config-
ure systems with
NX-series Units
Lists of the power consumptions,
weights, and other NX Unit data that is
required to configure systems with
NX-series Units are provided.
NX-series System Units
User’s Manual
W523 NX-PD1
NX-PF0
NX-PC0
NX-TBX01
Learning how to
use NX-series
System Units
The hardware and functions of the
NX-series System Units are described.
Sysmac Studio Version
1 Operation Manual
W504 SYSMAC-
SE2
Learning about the
operating proce-
dures and func-
tions of the
Sysmac Studio
Describes the operating procedures of
the Sysmac Studio.
NX-IO Configurator
Operation Manual
W585 CXONE-
ALD-V4
Learning about the
operating proce-
dures and func-
tions of the NX-IO
Configurator.
Describes the operating procedures of
the NX-IO Configurator.
NJ/NX-series Trouble-
shooting Manual
W503 NX701-
NJ501-
NJ301-
NJ101-
NX1P2-
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller
Concepts on managing errors that may
be detected in an NJ/NX-series Con-
troller and information on individual
errors are described.
NY-series
Troubleshooting Manual
W564 NY532-
NY512-
Learning about the
errors that may be
detected in an
NY-series Indus-
trial PC
Concepts on managing errors that may
be detected in an NY-series Controller
and information on individual errors are
described.
NX-series EtherCAT®
Coupler Unit User’s
Manual
W519 NX-ECC20 Learning how to
use an NX-series
EtherCAT Coupler
Unit and Ether-
CAT Slave Termi-
nals
The following items are described: the
overall system and configuration meth-
ods of an EtherCAT Slave Terminal
(which consists of an NX-series Ether-
CAT Coupler Unit and NX Units), and
information on hardware, setup, and
functions to set up, control, and monitor
NX Units through EtherCAT.