Omron NX-ID - Page 411

A - 161
Appendices
NX-series Digital I/O Unit User’s Manual (W521)
A-8 Version Information with Communica-
tions Coupler Units
A
A-8-1 Connection to an EtherCAT Coupler Unit
*1. If you use a CPU Unit, the instructions for time stamp refreshing are supported by CPU Units with unit version
1.06 or later. If you do not use instructions for time stamp refreshing, you can use version 1.05. Refer to the
instructions reference manual for the connected CPU Unit or Industrial PC for details on the instructions for
time stamp refreshing.
NX Unit Corresponding unit versions/versions
Model Unit version
EtherCAT Coupler
Unit
CPU Unit or Industrial
PC
Sysmac Studio
NX-ID3317 Ver.1.0 Ver.1.0 Ver.1.05 Ver.1.06
NX-ID3343
NX-ID3344 Ver.1.1
Ver.1.06
*1
Ver.1.07
NX-ID3417 Ver.1.0 Ver.1.05 Ver.1.06
NX-ID3443
NX-ID3444 Ver.1.1
Ver.1.06
*1
Ver.1.07
NX-ID4342 Ver.1.0 Ver.1.05 Ver.1.06
NX-ID4442
NX-ID5142-1 Ver.1.13
NX-ID5142-5 Ver.1.10
NX-ID5342 Ver.1.06
NX-ID5442
NX-DA3603 Ver.1.10
NX-DA3603 Ver.1.13
NX-IA3117 Ver.1.08
NX-OD2154 Ver.1.1
Ver.1.06
*1
Ver.1.07
NX-OD2258
NX-OD3121 Ver.1.0 Ver.1.05 Ver.1.06
NX-OD3153
NX-OD3256
NX-OD3257
NX-OD3268 Ver.1.13
NX-OD4121 Ver.1.06
NX-OD4256
NX-OD5121
NX-OD5121-1 Ver.1.13
NX-OD5121-5 Ver.1.10
NX-OD5256 Ver.1.06
NX-OD5256-1 Ver.1.13
NX-OD5256-5 Ver.1.10
NX-OD6121-5
NX-OD6121-6 Ver.1.13
NX-OD6256-5 Ver.1.10
NX-OC2633 Ver.1.06
NX-OC2733 Ver.1.08
NX-OC4633 Ver.1.17
NX-MD6121-5 Ver.1.10
NX-MD6121-6 Ver.1.13
NX-MD6256-5 Ver.1.10