Omron NX Series - Page 104

Appendices
A - 38
NX-series Data Reference Manual (W525)
 Analog Input Units/Analog Output Units
NX Units Corresponding unit versions/versions
Model
Unit
version
Application with an NJ/NX/NY-series Con-
troller
*1
*1. Refer to the user’s manual for the EtherNet/IP Coupler Units for information on the unit versions of EtherNet/IP Units that
are compatible with EtherNet/IP Coupler Units.
Application with a CS/CJ/CP-series PLC
*2
*2. Refer to the user’s manual for the EtherNet/IP Coupler Units for information on the unit versions of CPU Units and
EtherNet/IP Units that are compatible with EtherNet/IP Coupler Units.
EtherNet/IP
Coupler
Unit
CPU Unit or
Industrial
PC
Sysmac Stu-
dio
EtherNet/IP
Coupler
Unit
Sysmac Stu-
dio
NX-IO Con-
figurator
*3
*3. For connection to an EtherNet/IP Coupler Unit with unit version 1.0, You can connect only to the peripheral USB port on
the EtherNet/IP Coupler Unit. You cannot connect with any other path. If you need to connect by another path, use an
EtherNet/IP Coupler Unit with unit version 1.2 or later.
NX-AD2203 Ver. 1.0 Ver. 1.2 Ver. 1.14 Ver. 1.19 Ver. 1.0 Ver. 1.10 Ver. 1.00
NX-AD2204
NX-AD2208
NX-AD2603
NX-AD2604
NX-AD2608
NX-AD3203
NX-AD3204
NX-AD3208
NX-AD3603
NX-AD3604
NX-AD3608
NX-AD4203
NX-AD4204
NX-AD4208
NX-AD4603
NX-AD4604
NX-AD4608
NX-DA2203
NX-DA2205
NX-DA2603
NX-DA2605
NX-DA3203
NX-DA3205
NX-DA3603
NX-DA3605