Omron NX Series - Page 113

A - 47
Appendices
NX-series Data Reference Manual (W525)
A-6 Version Information with Commnica-
tions Coupler Units
A
A-6-3 Support Functions of the Communications Coupler Units and Restrictions on the NX Units
The following is a list of restrictions for NX Units categorized by type.
 NX Unit Part 1
 NX Unit Part 2
EtherNet/IP Coupler Unit
Function of EtherNet/IP Coupler Unit
Models of NX Units and unit versions
Digital I/O
Units
Analog
Input
Units/Ana-
log Output
Units
Tempera-
ture Input
Units
Position
Interface
Units
System
Units
Restarting Restarting a specified NX Unit Ver.1.0 Ver.1.0 Ver.1.1 Ver.1.1 Ver.1.0
Monitoring total power-ON time Ver.1.0 Ver.1.0 Ver.1.1 Ver.1.1 Ver.1.0
Restarting after
Clear All Mem-
ory operation
Restarting only the specified
NX Unit after performing the
Clear All Memory operation
for a specified NX Unit
Ver.1.0 Ver.1.0 Ver.1.1 Ver.1.1 Ver.1.0
Restarting after
transferring
Unit operation
settings
Restarting the NX Unit to
which the Unit operation set-
tings were transferred when
you transfer the settings to a
specified NX Unit
Ver.1.0 Ver.1.0 Ver.1.1 Ver.1.1 Not sup-
ported
Function of EtherNet/IP Coupler Unit
Models of NX Units and unit versions
Safety Con-
trol Units
Communi-
cations
Interface
Units
Load Cell
Input Unit
Heater Burn-
out Detec-
tion Units
IO-Link Mas-
ter Unit
Restarting Restarting a specified NX Unit Not sup-
ported
Not sup-
ported
Ver.1.0 Ver.1.0 Ver.1.0
Monitoring total power-ON time Not sup-
ported
Not sup-
ported
Ver.1.0 Ver.1.0 Ver.1.0
Restarting after
Clear All Mem-
ory operation
Restarting only the specified
NX Unit after performing the
Clear All Memory operation
for a specified NX Unit
Not sup-
ported
Not sup-
ported
Ver.1.0 Ver.1.0 Ver.1.0
Restarting after
transferring
Unit operation
settings
Restarting the NX Unit to
which the Unit operation set-
tings were transferred when
you transfer the settings to a
specified NX Unit
Not sup-
ported
Not sup-
ported
Ver.1.0 Ver.1.0 Ver.1.0