Omron NX Series Reference Manual

Appendices
A - 14
NX-series Data Reference Manual (W525)
Temperature Control
Units
Model number of voltage
output for driving SSR
Control period This is applicable to the control out-
puts. The value set for Ch Control
Period (Heating) or Ch Control
Period (Cooling) in the Unit opera-
tion settings of the Temperature
Control Unit.
Model number of linear
current output
0 [μs] −
*1. If only a definition is given in the above table, refer to the data of the NX Units in Section 1 Data List or the
manuals for the specific NX Units for the values of the items.
NX Units
Tnx-Outdelay
*1
Remarks
Type Model

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model