Omron OMNUC G5 Series User Manual

A-12
A-1 Object List
OMNUC G5-series AC Servomotors and Servo Drives User’s Manual (with Built-in EtherCAT Communications)
A
Appendix
Default setting Setting range Unit
Correspond-
ing Pn number
Relevant
control modes
002E 2E2E hex 0 to 00FF FFFF hex − Pn407 All
0003 0303 hex 0 to 00FF FFFF hex − Pn410 All
0002 0202 hex 0 to 00FF FFFF hex − Pn411 All
0 0 to 21
*1
Pn416 All
0 0 to 214748364
*2
Pn417 All
4 0 to 21 − Pn418 All
0 0 to 214748364
*3
Pn419 All
0 0 to 2 − Pn421 All
50 10 to 20000 r / min Pn434 All
0 0 to 10000 ms Pn437 All
0 0 to 10000 ms Pn438 All
30 30 to 3000 r / min Pn439 All
0 0 to 13 − Pn440 All
0 0 to 13 − Pn441 All
10
0 to 262144 Command units Pn442 csp
1 0 to 2 − Pn504 All
0 0 to 2 − Pn505 All
1 0 to 1 − Pn508 All
70 70 to 2000 ms Pn509 All
0 0 to 5000 0.1% − All
0 0 to 500 % Pn512 All
0 0 to 20000 r / min Pn513 All
10 0 to 1000 0.1 rotation Pn514 csp
0 0 to 3 − Pn515 All
0 0 to 1 − Pn520 csp
6 0 to 7 − Pn521 csp
5000 0 to 5000 0.1% − csp
5000 0 to 5000 0.1% − csp
0 0 to 10000 0.1 ms Pn605 csp
100 50 to 1000 % Pn606 csp
0 -100 to 100 % Pn607 All
*1. For units, refer to information on object 3416 hex on page 9-26.
*2. Monitor unit in object 3416 hex/V
*3. Monitor unit in object 3418 hex/V

Omron OMNUC G5 Series Specifications

General

Brand	Omron
Model	OMNUC G5 Series
Category	Servo Drives
Language	English