Omron R88D-KN series User Manual

A-153
Appendicies
G5 Series AC Servo Drives With Built-in EtherCAT Communications, Linear Motor Type
A-3 Sysmac Error Status Codes
App
A-3-2 Error Description
Event name External Encoder Overheating Warning Event code 08040000 hex
Meaning The external encoder temperature exceeded the specified value.
Source EtherCAT Master Function Module Source details Slave Detection
timing
Continuously
Error attributes Level Observation Recovery --- Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Remedy Prevention
The ambient temperature is too high. Remove the cause of external
encoder overheating.
Adjust the surrounding environment
so that the external encoder does not
overheat.
Linear Motor failed. Replace the Linear Motor. None
Attached
information
None
Precautions/
Remarks
“A5” is displayed on the front panel of the Servo Drive.
Event name Life Expectancy Warning Event code 08050000 hex
Meaning The remaining life of the capacitor or the fan is shorter than the specified value.
Source EtherCAT Master Function Module Source details Slave Detection
timing
Continuously
Error attributes Level Observation Recovery --- Log category System
Effects User program Continues. Operation Not affected.
Indicators EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
--- --- ---
System-defined
variables
Variable Data type Name
None --- ---
Cause and
correction
Assumed cause Remedy Prevention
The life expectancy of the capacitor or
the fan is shorter than the specified
value.
Replace the Servo Drive. None
Attached
information
None
Precautions/
Remarks
“A7” is displayed on the front panel of the Servo Drive.

Omron R88D-KN series Specifications

General

Brand	Omron
Model	R88D-KN series
Category	Controller
Language	English