Omron SYSMAC C Series User Manual

Specifications
Programming console
(horizontal type) For SYSMAC-C series programmable controllers 3G2A6-PRO15-E
Programming consoie
(vertical type}
Programming consote 50cm, for C20 only 3G2C7-CN512
connecting cable 1m, for C20 only 3G2C7-CN122
For SYSMAC-C series programmable controllers 3G2A5-PRO13-E
Cassette tape recorder connecting
cable
PROM writer For SYSMAC-C series programmable controllers 3G2A5-PRWO04-E
For SYSMAC-C series programmable controllers (Printer/X-Y plotter
connecting interface and memory cassette are separately available.)
1.5m SCY-PLGO1
Printer interface unit 3G2A5-PRTO1-E
Memory cassette for printer i 5
interface
unit
Exclusive
for
SYSMAC-C20
3G2A5-MP009-E
Printer connecting cable 2m (can be also used for X-Y plotter connection) SCY-CN201
For connecting GPC (CRT type/LCD type} and MSB, exclusively for
SYSMAC-C20
Peripheral interface unit 3G2C7-1PO02
Peripheral interface unit i
connecting
cable
For
connecting
GPC
(CRT
type/LCD
type)
and
MSB
3G2A2-CN221
Hee
eee
end
conuale
AC
110/120V
(Memory
pack
is
separately
available.)
3G2C5-GPC01-E
Graphic programming console
(LCD type) AC 220/240V (Memory pack is separately available.) 3G2C5-GPCO2-E
tee
ee
for
GPC
For
SYSMAC-C
series
programmable
controllers
(C20,
C120,
C250,
C500)
3G2C5-MP301-E
Graphic programming console F
(CRT type) AC 110/120V 3G2A5-CRT19
Graphic programming console
(CRT type) AC 220/240V 3G2A5-CRT20
AC 110V. Two devices can be connected.
Memory cassette is separately available. 3G2A5-MSB01-E
Multisupport base
SUPP
AC
220V.
Two
devices
can
be
connected.
3G2A5-MSB02-E
Memory cassette is separately available.
Memory, cassette for muitisupport For SYSMAC-C series programmable controllers 3G2A5-MP001-&
For SYSMAC-C series programmable controliers 3G2A9-BATO8
For
nonexpandable
type
CPU
ee
NOTE
2.)
For expandable type CPU (See NOTE 3.)
For nonexpandable type CPU
For expandabie type CPU
Link adapter Repeater for fiber optics (AC 110/220V, AC/DC 12 to 24V) 3G2A9-AL002-E
Cable length: 0.1m, with connector 3G5A2-0F011
Cable length: 1m, with connector 3G5A2-0F 101
Cable length: 2m, with connector 3G5A2-0P201
Cable length: 3m, with connector 3G5A2-0F 301
Fiber optics cable Cable length: 5m, with connector 3GBA2-0F501
{for indoor use} i Cable length: 10m, with connector 3G5A2-0F111
Cable iength; 20m, with connector 3G5A2-0F211
Cable length: 30m, with connector i 3G5A2-0F311
Cable length: 40m, with connector 3G5A2-0F 414
Cable length: 50m, with connector 3G5A2-0F511
NOTE:
1. The RAM and ROM for the CPU are separately available. The battery set is provided to the CPU.
2. The RAM-G and RAM-F are not compatible with each other.
Programming of up to 170 addresses can be performed without the RAM-G.
3. The RAM chip is mounted in the expandable type CPU as the factory-set condition for shipment.
4, Although both the vertical type and horizontal type programming consoies can be used with the SYSMAC-C20, the use of the horizontal
type is recommended in consideration of operability.

Omron SYSMAC C Series Specifications

General

Brand	Omron
Model	SYSMAC C Series
Category	Controller
Language	English