Omron SYSMAC C Series - Page 160

Index
Programming
beginning 4-1
connecting blocks B-4
connecting blocks using OR instruction B-5
eight steps 3-1
example 4-6
introduction 3-1
problem with overwriting old program 4-4
summary on how to begin 4-5
PROM writer A-12
PROM, restrictions A-15
Protective cover for end station A-9
Proximity switch, using with C20 6-5
Pushbutton switch, using with C20 6-6
Quick-search editing functions 5-1
Rapid check
of counter/timer values 5-9
of relay status 5-9
Ratings F-3
Relation
between special auxiliary relays and instructions D-4
between contro! tasks 3-2
Relay
assignment D-1
coils, setting and resetting all at once B-12
coils, using IL and ILC to set and reset B-12
contacts, how to search for specific one 5-3
Relay ladder diagramming method 1-2, 3-1, 3-4
Relay list, by number D-2
Relay status 5-5
checking rapidly 5-9
Relay, forced set/reset 5-6
Relay, outputting to B-1
Relays 1808 to 1907 5-7
Remote data communication A-3
Replacing defective parts E-4
Replacing battery E-3
Response time
caiculation example C-6
meaning C-5
Restrictions on PROM writing A-15
Right bus bar 3-4
Robot arm 6-8
RUN mode, function 4-3