Omron SYSMAC C Series User Manual

Using the programming console
Remember that the coil and the time value for the contact keyed in for
address
0005
must
stil!
be
specified.
This
is
done
by
keying
in
poaz
for address 0008.
This message is displayed asking for the timer data. Since the data
includes a decimal point before the last digit, to set a value of 2 seconds,
we enter
C
^o | WRITE
The only thing that remains is to complete the circuit by specifying the
output. Do this by entering
OUT
e
The output relay number for this output is 0500, which is automatically
selected by the PC. (Remember that 05xx is the output channel
designation, while 00xx is the input channel designation. The relay
number is xx.)
The final instruction in our program is the END instruction, which tells the
PC
that
the
program
is
complete.
Writing
this
requires
the
use
of
the
FUN
key
and
the
value
01
which
represents
the
END
instruction.
So
key
in
ral) oe
and you're finished.
Now check your program
To check whether the program has been correctly written, go back
through
it
using
the
arrow
keys
to
scan
what
you've
done.
If
you
see
you
need
to
make
corrections,
just
overwrite
the
statements
that
are
in
error.
Deletion and insertion of instructions is explained next.

Omron SYSMAC C Series Specifications

General

Brand	Omron
Model	SYSMAC C Series
Category	Controller
Language	English