Omron V600 Series User Manual

140
Section 6 Error Lists
RFID System
Operation Manual
Section 6
Troubleshooting
System Errors
Error
code
Name Description
92
Antenna power supply
voltage error
The voltage supplied to the Read/Write Head from the ID Controller has dropped.
• Prepare a replacement ID Controller.
93 Memory error
A memory may have occurred in the ID Controller or noise may have caused an error.
• Reset the power supply.
• Turn ON the RESET input.
• Use the SP command to reset communications with the Data Carrier. (Prepare a
replacement if normal communications cannot be recovered.)

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C