Omron V600 Series User Manual

43
RFID System
Operation Manual
Section 2 Wiring
Section 2
Installation and Wiring
Windows Vista
1. Turn ON the power to the personal computer and start Windows Vista.
2. Connect the ID Controller to the computer via USB.
For details on connection methods, refer to USB Port.
p.34
Wait for the following window to be displayed.
3. When the following window is displayed, select Locate and install driver software
(recommended) Button.
4. If the User Account Control Dialog Box is displayed, click the Continue Button.
5. If a dialog box appears for searching for software online, select the Don't search online Option. If this
dialog box is not displayed, go to the next step.

Omron V600 Series Specifications

General

Operating Frequency	13.56 MHz
Supported Standards	ISO 15693, ISO 18000-3
Read Range	Up to 70 mm (depending on tag and environment)
Power Supply	24 VDC ±10%
Operating Temperature	-10 to 55°C (with no icing or condensation)
Humidity	35% to 85% (non-condensing)
Communication Interface	RS-232C