Do you have a question about the Onkyo TX-LR552 and is the answer not in the manual?
Channels | 5.1 |
---|---|
HDMI Inputs | 4 |
HDMI Outputs | 1 |
Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
Response Bandwidth | 10 Hz - 100 kHz |
Signal-To-Noise Ratio | 100 dB |
THD | 0.08% |
Input Impedance | 47 kΩ |
Input Sensitivity | 200 mV |
Tuner Type | FM/AM |
Tuner Bands | FM, AM |
Preset Station Qty | 40 |
Digital Sound Processor (DSP) | Yes |
Analog Audio Inputs | 4 |
Phono Input | Yes |
Subwoofer Output | 1 |
HDMI Version | 1.4a |
Digital Audio Inputs | 2 optical, 1 coaxial |
Speaker Impedance | 6-16 Ohm |
Dimensions (W x H x D) | 435 x 150 x 328 mm |
Surround System Class | 5.1 |
Essential safety guidelines for operating the AV receiver, covering warnings and precautions.
Important notes and warnings before using the AV receiver, including care and power.
Identification and function of all rear panel connection terminals.
Guide to installing batteries in the remote controller.
Instructions on how to use the remote control effectively.
Step-by-step guide to connecting speakers to the receiver's terminals.
Essential preparatory steps before connecting AV components.
Steps for connecting the receiver to a TV or projector.
Procedures for connecting a DVD player to the receiver.
Using RI for integrated control of Onkyo DVD players.
Step-by-step guide to turning the AV receiver on.
Initial configuration of speakers, including automatic detection.
Adjusting individual speaker volume levels using a test tone.
Mapping digital audio and component video inputs to sources.
Configuring component video input assignments.
How to choose which connected component to listen to.
Guide to tuning and listening to AM/FM radio stations.
Overview of selecting different sound modes.
Detailed configuration of speaker sizes and presence.
Solutions for power-related issues like not turning on.
Troubleshooting steps for no sound or low volume issues.
Solutions for problems related to video display.
Troubleshooting radio reception issues.
Steps to resolve issues with the remote controller not working.