Onkyo TX-SR3100 - Page 94

94
Appendix
(*1) A center speaker or surround speakers need to be installed.
(*2) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.
(*3) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable.
– DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM
(*4) Surround speakers or height speakers need to be installed.
(*5) A center speaker, surround speakers, or height speakers need to be installed.
(*6) Cannot be selected if "Speaker Virtualizer" ( →p62) is set to "O󰀨".
(*7) Cannot be selected when the input format is monaural.
(*8) The listening mode displayed depends on the speaker layout ( →p89). Furthermore, when the setting for "Speaker Virtualizer" ( →p62) is "O󰀨" (the default
value is On), then modes other than Atmos and Dolby Surr cannot be selected.
(*9) This cannot be selected when the input format is DTS Express.
(*10) Displayed as "DTS" on this unit.
(*11) Displayed as "DTS-HD" on this unit.
 Speaker Layouts and Selectable Listening
Modes ( →p89)