Driving and operating 209
● IEC 62196-2
● IEC 62196-3
● ISO 15118
Ensure that all local electrical code/
standards are being met for a
10 ampere continuous load. Always
follow the charging equipment
installation instructions. Contact a
workshop for more information.
9 Warning
If the capacity of the electrical
circuit or AC socket is not known,
only use the lowest charge level
until the circuit capacity has been
inspected by a qualified
electrician. Using a charge level
that exceeds either the electrical
circuit or the AC outlet capacity
may start a fire or damage the
electrical circuit.
Towing
General information
The vehicle is neither designed nor
intended to tow a trailer or another
vehicle.
To Next Page
Loading...
