Driving and operating 197
There is also an available mobile app
with several charging functions.
Smartphone remote function 3 26.
Automatic power supply cut-off
When the vehicle no longer needs to
use power from the charging station,
the charging process will be stopped.
Use the radio remote control to unlock
the DC vehicle plug.
Energy can still be consumed from
the charging station when the
vehicle’s displays and indicators
show that the high voltage battery is
fully charged. This is to ensure the
high voltage battery is in optimal
temperature operating range to
maximise vehicle range.
Programmable charging 3 197.
End charging
1. Wait until the charging process
has been fully stopped, the
vehicle plug is unlocked and the
charging status indicator is solid
green or off.
2. Unplug the DC vehicle plug from
the DC charge port on the vehicle
and close the dust cover.
3. Close the charge port door by
pressing firmly in the centre to
latch properly.
4. Manually disengage the electric
parking brake before driving the
vehicle.
5. To start another DC charge,
remove the DC vehicle plug and
reconnect.
Programmable charging
Programmable charge modes
To view the current charge mode
status in the Infotainment display,
touch Energy and then Charging.
The charge start and charge
complete time estimations are also
displayed on the screen. These
estimations are most accurate when
the vehicle is plugged in and in
moderate temperature conditions.
Also, to get an accurate time
estimate, the vehicle uses an internal
clock for programmable charging, not
the clock in the instrument panel.
Charge mode selection
Touch Energy and then Charging and
select the desired charging mode.
Immediate
The vehicle starts charging as soon
as it is connected to an electrical
outlet.
Select the Charge limit, see below.
Departure
The vehicle estimates the charging
start time considering the
programmed departure time for the
current day of the week. Charging
begins at the start time and is
To Next Page
Loading...
