2.2.4 Job status
After a job starts, its job status screen is automatically displayed. This status screen
shows the details of a given job, including a header showing the job type, its status,
its start and end times, the overall data rate, time remaining, and percent complete.
The lower area of the job status screen shows additional job details, including hash
values (when available) sub-step progress (for example, Duplication separate from
Verification in a duplication/verification job), a settings summary, and the drives
involved in the job. Tapping a drive tile opens a drive details screen which provides
a quick view of all the information available for the drive. The fixed bottom area of
the job status screen includes buttons for exporting the forensic log and canceling
the job. An example of an active Duplication job status screen is shown below.
Note: If the detailed job status screen is closed, a brief summary of the job
status is still available in the expanded function tile on the home screen.
Tapping the lower portion of that function tile will reopen the detailed job
status screen. Also, when a job is running a circular spinner is shown in the top
navigation bar to the right of the TD4 model name. Tapping the spinner will
reopen the detailed job status screen.
2.2. Navigating TD4
ISTD230100-UGD-EN-1
User Guide
13
To Next Page
Loading...
