OPENTEXT Tableau Forensic TD4 - Administration

Audio: Allows selection of the system volume level to be used for all audible alerts.
Selecting the Idle Chirp box will cause the job completion sound to be repeatedly
played every one minute until the job status screen has been closed. Note that, even
if Idle Chirp is disabled, the job completion sound will be played one time at the end
of the job and the indicator LED will flash completion status until the job status
screen has been closed. The default setting is to enable Idle Chirp.
Time Display: Allows selection of the displayed system time zone and time display
mode (12-hour or 24-hour). Time Display setting changes must be explicitly saved to
take effect. Note that changing time-related settings is not allowed while a job is
running. The default display mode setting is 12-hour mode.
System Time: Allows entry of the system time. System Time setting changes must
be explicitly saved to take effect. Note that changing time-related settings is not
allowed while a job is running.
System Date: Allows entry of the system date. System Date setting changes must be
explicitly saved to take effect. Note that changing time-related settings is not
allowed while a job is running.
Brightness: Allows selection of the brightness of the LCD screen.
Virtual Keyboard: Provides the option to always show the on-screen, virtual
keyboard, even when an external keyboard is detected. This is useful for a specific
scenario, where a unified (dual-purpose) wireless keyboard/mouse is plugged into
TD4, but only the mouse part is being used. Select the ‘Always show’ option to
ensure that the virtual keyboard appears in this situation. By default the virtual
keyboard is hidden when a USB keyboard is detected.
3.2.2 Administration
In some forensic work environments, it may be desirable to prohibit unauthorized
users from accessing the unit or changing specific settings. TD4 allows an
administrative level user to lock specific areas of the user interface to allow such
control.
Tap the Administration button in the System Navigation Menu to initiate this setup.
The initial Administration setup screen is shown below.
Chapter 3 Configuring TD4
22
OpenText™ Tableau™ Forensic TD4 Duplicator
ISTD230100-UGD-EN-1