If any of the job settings are set to Prompt, the advanced settings screen will
appear which will allow selection of the specific settings desired for the
impending job. The Prompt option is available for the following system settings:
Hashes, ‘Duplicate’ File Type, Readback Verification, and Trim Clones.
If there are any issues with the job setup/configuration that TD4 considers to be
blocking or of forensic significance, the advanced settings screen will appear and
provide information about the issue and the ability to rectify it, if possible. An
example of a blocking configuration issue is if a SHA-256 hash is selected with
E01 file type output. E01 does not support SHA-256 hashes.
The screenshot below is an example of the advanced settings screen for a
Duplicate job with a Prompt setting (Readback Verification) and an issue of
forensic significance (DCO present on source). Note that the items that directly
caused the advanced settings screen to be displayed are shown as expanded, but
that other, potentially related setting items will also appear in that screen
unexpanded.
Chapter 4 Using TD4
56
OpenText™ Tableau™ Forensic TD4 Duplicator
ISTD230100-UGD-EN-1
To Next Page
Loading...
