S E T U P M E N U O P T I O N S
49
Video Output Setup
The Video Output Setup section of the Setup Menu allows you to configure video output options.
1. Picture Adjustment: Adjusts picture control settings. The UDP-203 provides a wide array of
picture controls. Please refer to the Picture Adjustment section on page 53 for details about
each control.
2. HDR: Allows you to choose the output mode for High-Dynamic Range content.
Auto (default) – Outputs HDR if supported by both the content and the display. The player
automatically checks for HDR content and whether the TV or projector is HDR compatible,
and if both criteria are met, the player outputs HDR video from its HDMI (Main) output
terminal. Otherwise, only SDR video is output.
On – If the video content supports HDR, the player will always output video with HDR
enabled regardless of whether or not the TV or projector indicates that HDR is supported.
This may result in image abnormalities if the connected display does not support HDR.
Off – Always outputs video without HDR. HDR content will be converted to SDR.
3. Output Resolution: Allows you to choose the output resolution that best matches your
television’s native resolution.
Auto (default) – Automatically set the optimal output resolution.
Custom – Set the output resolution according to the desired Custom Resolution setting.
Source Direct – Outputs at the original resolution of the source material.
NOTE
DO NOT set the Output Resolution to Custom unless you know your TV’s native
resolution and the selected Custom Resolution is supported by your TV. For a detailed
description on how to choose a proper output resolution, please refer to the Select the
Best Output Resolution section on page 54 of this manual.
There will be no video output or an “unsupported video signal” message may appear on
screen if an unsupported output resolution is selected. To get the video back, you need
to press the RESOLUTION button on OPPO remote until “AUTO” is displayed on the
front panel of the UDP-203. Then press the Enter button on the OPPO remote or wait
To Next Page
Loading...
Need help?
General
