Oppo udp-203 User Manual

S E T U P M E N U O P T I O N S
72
Network Setup
The Network Setup section of the Setup Menu system allows you to configure the player’s network
connection, test the connection, and enable or disable BD-Live access.
1. Player Name: Enter and display the player’s identification name as it is displayed on local network
sharing devices. To change it, press the ENTER button to bring up the virtual keyboard. The name
can contain maximum 12 characters including spaces.
2. Connection Information: Displays the current internet connection information, such as connection
type, IP address, Ethernet MAC, Wireless MAC, etc.
3. Internet Connection: Allows you to select the internet connection type.
 Ethernet (default) – Connect to the internet through an Ethernet cable. Please refer to the
connection instructions on page 18. Selecting this will disable the built-in wireless module and
make the Wireless Setting option un-selectable.
 Wireless – Connect to the internet through the built-in wireless module. Please refer to the
connection instructions on page 19. Choosing Wireless will start the Wireless Setup
Assistant, and will also make the Wireless Setting option in the next row selectable.
 Off – Internet access is prohibited. This will make disable both the Ethernet and Wireless
modules and makes Wireless Setting, IP Setting, Proxy Setting and Connection Test options
un-selectable.
4. Wireless Setting – Start the Wireless Setup Assistant. You can start the Wireless Setup
Assistant by selecting the Wireless Setting option, or by selecting Wireless in Internet
Connection menu. The procedure is described as follows:
The player first searches for the previous wireless settings. If they exist, a message will pop up to
remind you.

Oppo udp-203 Specifications

General

Depth	311 mm
Width	430 mm
Height	79 mm
Manual	Yes
Weight	4300 g
Device type	Blu-Ray player
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby TrueHD
Cables included	AC, HDMI
Wi-Fi standards	Wi-Fi 5 (802.11ac)
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Disc types supported	BD-R, BD-RE, CD, CD-R, CD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio formats supported	AIFF, ALAC, APE, FLAC, WAV
Ethernet LAN data rates	1000 Mbit/s
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.5 W
Power consumption (typical)	40 W
Signal-to-Noise Ratio (SNR)	112 dB
Operating relative humidity (H-H)	15 - 75 %
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.001 %