EasyManuals Logo

Oppo udp-203 User Manual

Oppo udp-203
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
B A S I C O P E R A T I O N S
25
Volume Control
1. On the UDP-203, the volume control only affects the analog
audio output. It does not apply to digital audio output (HDMI,
Coaxial and Optical) either in raw bitstream format or in
LPCM format.
2. The VOL +/- buttons on the players remote control are
provided as an alternative way of controlling the audio
volume. It is recommended that you use this control to make
the audio volume from the player the same as from other
sources, such as TV programs or a VCR.
Press the VOL button to decrease the volume.
Press the VOL + button to increase the volume.
Mute
1. Press the MUTE button on the remote control during
content playback to turn off audio output. The TV screen
will display a mute icon. The front panel MUTE indicator
will also light up.
2. Press the MUTE button again to resume audio output.
NOTE
Check the MUTE status on the front panel display of the player when there is no audio output.
You may also press the MUTE button to verify the MUTE status.
Audio Language/Track Selection
1. To select the audio language or track, press the AUDIO
button on the remote control during playback.
2. Repeatedly press the AUDIO button or use the UP/DOWN
ARROW buttons to choose from all available language or
audio tracks.
NOTE
Availability of languages and audio channels varies by disc. Some DVD-Audio discs allow
audio track selection with the AUDIO button, while others require the user to choose from the
audio setup menu of the disc. When playing an SACD with both multi-channel and stereo
content, the AUDIO button can be used to switch between the two formats.

Table of Contents

Other manuals for Oppo udp-203

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oppo udp-203 and is the answer not in the manual?

Oppo udp-203 Specifications

General IconGeneral
Depth311 mm
Width430 mm
Height79 mm
ManualYes
Weight4300 g
Device typeBlu-Ray player
Product colorBlack
Audio decodersDTS-HD Master Audio, Dolby TrueHD
Cables includedAC, HDMI
Wi-Fi standardsWi-Fi 5 (802.11ac)
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Disc types supportedBD-R, BD-RE, CD, CD-R, CD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio formats supportedAIFF, ALAC, APE, FLAC, WAV
Ethernet LAN data rates1000 Mbit/s
Operating temperature (T-T)5 - 35 °C
Power consumption (standby)0.5 W
Power consumption (typical)40 W
Signal-to-Noise Ratio (SNR)112 dB
Operating relative humidity (H-H)15 - 75 %
Audio output channels7.1 channels
Total Harmonic Distortion (THD)0.001 %

Related product manuals