Oppo udp-203 User Manual

S E T U P M E N U O P T I O N S
71
 Space Used – Displays the used space of the persistent storage. If too much space is used and
the available space becomes too low, some Blu-ray Discs may not play properly.
 Erase Persistent Storage – Erases the BD-Video data from the persistent storage or initializes
a USB drive so it can be used for persistent storage.
13. Text to Speech: Allows you to adjust Text to Speech settings.
 Switch – Allows you to enable and disable the player reading the text on screen when it is
highlighted:
 On – The text on screen will be read out when it is highlighted.
 Off (default) – The text on screen will not be read out when it is highlighted.
 Language – Allows you to choose the language for reading the text on screen when it is
highlighted. Currently the player supports English and Spanish. The default language is English.
 Volume – Allows you to set the volume of the voice for reading text on screen when it is
highlighted. The default value is 100.
 Pitch – Allows you to set the pitch of the voice for reading text on screen when it is highlighted.
The default value is 100.
 Speed – Allows you to set the speed of the voice for reading text on screen when it is
highlighted:
 Very Slow / Slow / Normal / Fast / Very Fast – These are the available speed of the
voice for reading text on screen when it is highlighted. You can press the UP/DOWN
ARROW buttons and the ENTER buttons to select it. The default speed is Normal.
14. Settings Management: Allows you to backup or restore the player settings. This option affects the
settings in Setup Menu. It does not export/import private information such as WiFi password or
account information.
 Backup Settings – Backup the player settings to the first detected USB storage device. The
player will create a new configuration file named “[player model].cfg”, such as “UDP203.cfg”,
and the settings will be stored in binary format which can only be accessed by OPPO technical
support.
 Restore Settings – Restore the player’s settings from external USB storage. The player will
access the first detected USB storage device for the configuration file. To avoid any confusion,
we recommend only connect one USB storage device to the player at this time.
15. Reset Factory Defaults: To reset all settings to the factory default value. This operation also sets
BD-Live Network Access to be Off (details on page 75) and performs Erase Persistent Storage
(details on page 70). However, the remote control code, parental control password and ratings will
not be reset. This operation is only available when the playback is completely stopped or when
there is no disc loaded.
 Erase Accounts and Settings – Resets all settings to their factory default values and removes
all account information.
 Erase Settings – Resets all settings to their factory default values, but keeps account
information.

Oppo udp-203 Specifications

General

Depth	311 mm
Width	430 mm
Height	79 mm
Manual	Yes
Weight	4300 g
Device type	Blu-Ray player
Product color	Black
Audio decoders	DTS-HD Master Audio, Dolby TrueHD
Cables included	AC, HDMI
Wi-Fi standards	Wi-Fi 5 (802.11ac)
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Disc types supported	BD-R, BD-RE, CD, CD-R, CD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-R, DVD-R DL, DVD-RW
Supported video modes	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Audio formats supported	AIFF, ALAC, APE, FLAC, WAV
Ethernet LAN data rates	1000 Mbit/s
Operating temperature (T-T)	5 - 35 °C
Power consumption (standby)	0.5 W
Power consumption (typical)	40 W
Signal-to-Noise Ratio (SNR)	112 dB
Operating relative humidity (H-H)	15 - 75 %
Audio output channels	7.1 channels
Total Harmonic Distortion (THD)	0.001 %