Opticon OPR 2001 - Connector Specification (Scanner Side); Default Settings; Set Default Interface

Opticon
OPR 2001
Specifications Manual
29
9.4. Connector Specification (Scanner Side)
CN1 (12-pin)
Pin No RS-232C USB Wedge
1 GND GND GND
2 RXD — —
3 TXD — —
4 CTS — —
5 RTS — —
6 NC — —
7 NC
－DATA
KEY_CLK
8 NC
＋DATA
KEY_DATA
9 NC — CPU_CLK
10 NC — CPU_DATA
11 VCC VCC VCC
12 FG (shield) FG (shield) FG (shield)
10. Default Settings
10.1. Set Default Interface
Scan the following menu barcodes to return to the default settings.
RS-232C
Functions Menu labels Menu codes
SET
_ZZ_
ZZ
RS-232C
_U2_
U2
END
_ZZ_
ZZ