Optimum Optimill MT 50 User Manual

Version 1.2.8 - 2020-08-0312 Translation of original operating manual
MT50
GB
MT50_GB_1.fm
1.6.3 Obligations of the operating company
The operator must instruct the staff at least once per year regarding
 all safety standards that apply to the milling-machine,
 the operation,
 accredited technical guidelines.
The operator must also
 check the knowledge of the staff,
 document the trainings/instructions,
 require personnel to confirm participation in training/instructions by means of a signature,
 check whether the personnel is working safety- and risk-conscious and observe the operat-
ing instructions.
1.6.4 Obligations of the operator
The operator must
 have read and understood the operating manual,
 be familiar with all safety devices and regulations,
 be able to operate the milling.
1.6.5 Additional requirements regarding the qualification
For work on electrical components or equipment, there are additional requirements:
 Must only be performed by an electrical specialist or under the direction and supervision of
an electrical specialist.
Before carrying out work on electrical components or operating materials, the following meas-
ures must be taken, in the order given.
 Disconnect all poles.
 Secure against switching on.
 Check if the machine is zero potential.
1.7 Operator positions
The operator's position is at the front or on the right front of the milling-machine.
1.8 Safety measures during operation
CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts
and mist may be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at
the point of origin and is dissipated or filtered from the working area. To do so, use a
suitable extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using inflam-
mable auxiliary materials (e.g. spirit) it is necessary to take additional preventive meas-
ures in order to safely avoid health risks.

Optimum Optimill MT 50 Specifications

General

Brand	Optimum
Model	Optimill MT 50
Category	Power Tool
Language	English