optris CTlaser LT - Technical Data; Factory Settings

-14 -
2 Technical Data
2.1 Factory settings
Smart Averaging means a dynamic average adaptation at high signal edges. [Activation via
software only]. [►Appendix C – Smart Averaging]
Signal output object temperature
0 – 5 V
Emissivity
0.970 [LT/ LTF/ MT/ F2/ F6/ G5/ G7/ P7]
1.000 [05M/ 1M/ 2M/ 3M/ 4M]
Transmissivity
1.000
Average time (AVG)
0.2 s [LT]; 0.1 s [LTF/ MT/ F2/ F6/ G5/ G7/ P7]
0.001 s [05M/ 1M/ 2M/ 3M/ 4M]
Smart Averaging
Inactive (active [LTF])
Peak hold
Inactive
Valley hold
Inactive
w ww. . com
information@itm.com1.800.561.8187