92 Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
4. Connect the -48V or -60V return to the -48V or -60V wires to the circuit breaker.
5. Connect the power wiring to the server by plugging each power cable into the
server power supply units.
6. When you are ready to power up the server, close the circuit breaker and follow
the booting procedure described in “Powering On the System” on page 41.
Related Information
■ “Assembling and Installing the DC Input Power Cables” on page 83
To Next Page
Loading...
Need help?
General