Installing the Sun SPARC Enterprise T5140 and T5240 Servers 33
FIGURE: Rail Mounting Bracket Release Button (Either Server)
8. Verify that the CMA retracted without binding.
9. Adjust the cable straps and CMA as required to secure the cables.
Related Information
■ “Managing Cables With the CMA” on page 39
Connecting the Server Cables for Both
Servers
To boot the server, you must connect and configure the network and serial ports. The
procedures are given in the following sections.
The servers also have serial and USB ports available for connections to optional
device.
To Next Page
Loading...
