60 Sun SPARC Enterprise T5140 and T5240 Servers Installation Guide • December 2010
● If you do not want to start the preinstalled OS, set the Open Boot PROM
parameter auto-boot? to false. For example:
Related Information
■ “Reset the System” on page 60
■ Sun SPARC Enterprise T5140 and T5240 Servers Administration Guide
▼ Reset the System
● If it is necessary to reset the system, use the shutdown -g0 -i6 -y command.
It is not necessary to power the system off and on to simply reset the system.
Related Information
■ “Power Cycle the System” on page 60
■ Sun SPARC Enterprise T5140 and T5240 Servers Administration Guide
▼ Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Shut down the Solaris OS.
At the Solaris OS prompt, type the shutdown -g0 -i0 -y command. Then type
h when prompted to halt the Solaris OS and to return to the ok prompt.
-> set /HOST/bootmode script="setenv auto-boot? false"
# shutdown -g0 -i6 -y
# shutdown -g0 -i0 -y
# svc.startd: The system is coming down. Please wait.
svc.startd: 91 system services are now being stopped.
Jun 12 19:46:57 wgs40-58 syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems... done
Program terminated
r)eboot, o)k prompt, h)alt?
To Next Page
Loading...
