Ocean TRx™ 4500 Installation and Operations Manual 6-1
6 Navigating the MTSVLink
The MTSVLink management application is used to setup, operate and monitor
the system. The application is installed on the CCU and can be accessed by
either locally or remotely via and in-band or out-of-band connection to the
CCU.
The MTSVLink management application is automatically launched on the CCU
each time the CCU is powered on (rear power switch) or reset (front reset
power button).
The following information is included in this chapter:
6.1 Opening a Session to the CCU ........................................................ 6-2
6.2 Main Screens ................................................................................ 6-4
6.3 Saving Configuration changes ....................................................... 6-10
6.4 Shortcuts ................................................................................... 6-11
6.5 Configuring the Display ................................................................ 6-12
To Next Page