Orbit OCEANTRX4-500 - Shortcuts

Navigating the MTSVLink Shortcuts
OceanTRx
TM
4-500 Installation and Operations Manual 6-11
6.4 Shortcuts
 Keyboard Shortcuts
 Shortcut buttons
NOTE: Saving configuration changes. System configuration changes made using the software are
stored in volatile memory. Changes not saved to non-volatile memory will be lost when the system
reboots. Therefore, it is important to save any system configuration changes.
 Basic Keyboard shortcuts
Press
Operation Executed
[O]
Switches Basic mode to Configuration mode. Enter the
password (al-7200)
[U]
Switches Configuration mode to Basic mode.
[V]
Saves ACU Configuration
[S]
Enters Geostationary Satellites Screen
[3]
Opens O3B Current Satellite Constellation dialog
[F9]
Shut Down the System
[M]
Enters the Maintenance Screen
[L]
Enters the Graphic Data Logger Screen
[E]
Shows Release Version of the software
[R]
Enters Spectrum Analyzer Screen
[P]
Enters Step Track Screen
[ESC]
Go back to the previous screen or quit (if this is the last
screen)
 Commands Menu
Available commands
Save ACU configuration
Setting the GPS
Clear GPS
Setting the Compass
Setting the Threshold
IMU Initialization
Toggle Polarization
Reboot the ACU