Oriental motor BLE Series - FBL II Operation Pattern Example

Operation
−
46
−

Example of operation pattern
The chart below is an example of setting the internal potentiometer to 3000 r/min and external potentiometer to
1000 r/min and operating the motor at two speeds.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
3000 r/min
1000 r/min
Motor operation
Clockwise
Operating/
Instantaneous stop
Counterclockwise
Direction switching/
instantaneous reversion
Operating/
Speed switching/
Stopped
Acceleration operation/
Deceleration stop/
Instantaneous stop
during deceleration
∗
STOP-MODE input
(Deceleration stop/
Instantaneous stop)
REV input
(Counterclockwise)
FWD input
(Clockwise)
M0 input
(Internal potentiometer/
External potentiometer)
Lock
Release
Electromagnetic
brake operation
*
When switching the FWD input and REV input, provide an interval of at least 10 ms.
Note Make sure each signal remains ON for at least 10 ms.