Oriental motor BLV Series - 3 Precautions for Use

Precautions for use
6
3 Precautions for use
This section covers restrictions and requirements the user should consider when using the product.

Wiring
z
Connecting a motor and a driver
Use the dedicated connection cable (sold separately) when extending the wiring distance between the motor and the
driver.
z
Notes when the cable is used
Note the following points when the cable is used.
How to x the cable
Fix the cable at the positions near the connector so that no stress due to the bending or self-weight of the cable is
applied on the connector.
Also, do not excessively bend the cable near the connection part of the connector. Applying stress on the cable may
cause poor contact or disconnection, leading to malfunction or heat generation.
Motor
Deiver
Fix
Have length allowances
Have length
allowances
•
Fixing at two places on each side
•
Fixing at one place on each side
A wide clamp is also
available to use.
Connector
Banding band, etc
.
Connector
Banding band, etc.
Fix using two cable ties or a wide clamp. When the cable is moved, it causes the connectors to
move, causing stress to apply on the connector part.
When bending the cable
Do not excessively bend the cable.
Applying stress on the cable may cause poor contact or disconnection, leading to
malfunction or heat generation.
Do not bend ex
cessively
z
Note when connecting a power supply whose positive terminal is grounded
The USB connector on the driver is not electrically insulated. When grounding the positive terminal of the power
supply, do not connect any equipment (PC, etc.) whose negative terminal is grounded. Doing so may cause the driver
and these equipment to short, damaging both.
z
Noise elimination measures
Refer to p.33 for noise elimination measures.