Orion OPM-4260 - MSCS Protocol Commands (Info & Mode); Information, Input Mode, and Global Offset Commands

- 70 - - 71 -
- Receive from MPDP
STX CMD Length
Data
Check Sum ETX
ID Master
Value 0x02 Variable 0x02 Variable 0x01 Variable 0x03
* ID range (Program): 0x01(1) ~ 0xFF(255)
* Check Sum: execute "Not" operation after adding all the values in "STX~Data" area.
3.5. Infomation
- Command for displaying the information on the screen (Input source and resolution by OSD)
- CMD : 0x42
- It is available only on Power On (Operative) status.
- Send to MPDP
A. Normal command
STX CMD Length
Data
ETX
ID Master
Value 0x02 0x42 0x02 Variable 0X01 0x03
* ID range(Program): 0x01(1) ~ 0xFF(255)
B. Broadcast command
STX CMD Length Data: ID ETX
Value 0x02 0x42 0x01 0x00 0x03
* All PDP will do the same operation simultaneously. But, there will be no return communication. (One way command)
- Receive from MPDP
STX CMD Length
Data
Check Sum ETX
ID Master
Value 0x02 0x40 0x02 Variable 0X01 Variable 0x03
* ID range (Program): 0x01(1) ~ 0xFF(255)
* Check Sum: execute "Not" operation after adding all the values in "STX~Data" area.
3.6. Input-Mode Change
- Command for changing input mode without screen scaling
- It is available only on Power On (Operative) status.
- CMD: 0xDD(DVI), 0XDE(PC), 0XE2(Video)
- Send to MPDP
A. Normal Command
STX CMD Length
Data
ETX
ID Master XY X
Value 0x02 Variable 0x04 Variable 0X01 0X11 0X01 0x03
* ID range(Program): 0x01(1) ~ 0xFF(255)
B. Broadcast Command
STX CMD Length
Data
ETX
ID XY S X
Value 0x02 Variable 0x04 0x00 0x11 0x00 0x01 0x03
* All PDP will do the same operation simultaneously. But, there will be no return communication. (One way command)
- Receive from MPDP
STX CMD Length
Data
Check Sum ETX
ID Master
Value 0x02 Variable 0x02 Variable 0X01 Variable 0x03
* ID range (Program): 0x01(1) ~ 0xFF(255)
* Check Sum: execute "Not" operation after adding all the values in "STX~Data" area.
3.7. Global Offset
- Command for removing the image data in seam area (On) or displaying all the data on the screen (Off)
- It is available only on Power On (Operative) status.
- CMD: 0x74(On), 0x73(Off)
- Send to MPDP
A. Normal Command
STX CMD Length
Data
ETX
ID Master
Value 0x02 Variable 0x02 Variable 0X01 0x03
* ID range(Program): 0x01(1) ~ 0xFF(255)
B. Broadcast Command
STX CMD Length Data: ID ETX
Value 0x02 Variable 0x01 0x00 0x03
* Make all PDP do the same operation. But, there will be no return communication. (One way command)
- Receive from MPDP
STX CMD Length
Data
Check Sum ETX
ID Master
Value 0x02 Variable 0x02 Variable 0X01 Variable 0x03
* ID range (Program): 0x01(1) ~ 0xFF(255)
* Check Sum: execute "Not" operation after adding all the values in "STX~Data" area.
OPM-4260 | OPM-4260R
Innitely Expandable