DSPEC 50
®
and DSPEC 502
®
Digital Gamma-Ray Spectrometer User’s Manual 932502G / 0618
Figure 8. The Communication Control Screen.
gently click the card into the slot, and tap Import Photos from SD Card. A status message will
ask you to confirm file overwrites, and will report the number of files transferred. These images
can be turned on/off and repositioned in the display sequence just like the data display screens.
2.1.4. The Communication Control Screen
This screen lets you password-protect the Communication and Display Control screens, choose
your preferred date and time formats, and optionally assign a static IP address to an Ethernet-
connected unit. Tap the yellow “wrench” thumbnail to access it (Fig. 8). If a password is in
effect, a password screen with soft keyboard will open; tap the password and OK.
The upper-left Host name is factory-assigned. The MAC address is unique to the Ethernet
adapter and can be used to trouble-shoot network connection issues. The Advanced models will
also display the Web Page address (IP address/ORTEC) under the MAC address. The lower
right section of the screen shows the DSPEC 50 software and firmware version numbers, and the
serial number for each MCA board in the chassis.
The dynamic or static IP address assigned to the Ethernet port is displayed in the upper-right
corner. To assign a static IP address, see Appendix A.
To return to the Switchboard without making any changes, tap Cancel.
20
To Next Page
Loading...
Need help?
General
