OSAI OPENcontrol - OPENMill - Milling machines software

OPENMill - Millling machines software
OPENMill software is an intuitive environment for programming and management of
milling/drilling machines. It manages the execution of programs dened by a local graphic
and parametric programming and it includes a conversational editor, characterized
by extreme ease of use, allowing several
predened cycles besides the denition of
proles on the plane through geometrical
graphical elements. OPENMill is also the
new OSAI HMI interface dedicated to milling.
The end-user environment, specically
designed to expedite CNC use, requires few
commands, from soft-keys or touch-screen, to
use the main functions of the CNC. It includes
an integrated graphics with part preview for
program selection and real-time graphics to
highlight the parts being processed.
By using the pre-dened cycles, the operator is only required to select the desired cycle
and to insert the geometrical parameters, as shown below:
Selection of the preset cycle. Setting of the geometrical parameters.
Drilling and tapping cycles. Slot milling.
14