OPEN-M can be used standalone, but the congurability of the software allows easy
integration in a TCP/IP network to connect external PCs dedicated to the End User
interface. With the same ease the software can be congured to run Windows CE only
(the real time O.S. adopted by the OPENcontrol family) or both Windows CE and Windows
Embedded simultaneously (Dual Operating System) to execute both applications available
from the marketplace and the real-time CNC software on the same hardware.
OPEN-M provides the computing power needed for complex applications and can manage
up to 4 Processes and 32 axes.
OPEN-XL has the same technical features as OPEN-M, but with greater CPU computing
power, which allows those complex and time-critical applications, where the workload is
particularly high. OPEN-XL permits the management of a large number of Process (up to
24) and axes (up to 64).
OPEN-XLi is the highest performing product of the OPENcontrol family, adopting a i5 CPU
particularly suited for Dual Operating System conguration for the simultaneous execution
of Windows CE Operating Systems (real time) and Windows 7 Embedded (HMI). The ability
of the numerical control to isolate the execution of the operating systems by assigning a
CPU core to each one, provides the system with the characteristics of very high speed,
coupled with graphical processing capabilities typical of Windows desktop versions.
OPEN-XLi can manage up to 24 Processes and 64 axes.
OPEN-XLi CNC dimensions
OPENcontrol Technical overview
35
To Next Page
Loading...