Outback MATE User Manual

21
Setup the MATE
Start with the <MAIN> screen, which appears
aer the power-up screens, and press the
<SETUP> so key.
Press the <MATE> so key.
is screen displays the MATE’s code version and
some SETUP choices. Press the <PG2> so key
for a second screen of SETUP choices.
Press the <PG1> so key to return to the previous
screen, SETUP/MATE/PAGE1.
MAIN---------------------------------
9:57:32A
SUM STATUS SETUP ADV
SETUP-------------------------------
choose device:
FX MATE
SETUP/MATE/PAGE 1--------------
mate code rev: 402
choose category:
CLOCK CNT GLOW PG2
SETUP/MATE/PAGE2--------------
choose category:
PG1 SUMRY COMM PG3
Note: To return the MATE to its factory default settings, please see page 96
SETUP/MATE/PAGE3--------------
choose category:
PG2 BEEP MAIN

Outback MATE Specifications

General

Display	LCD
Operating Temperature Range	-20°C to 60°C
Mounting	Wall Mount
Type	System Display and Controller
Communication	RS232
Communication Ports	RS232