93
On the ADV menu, push the <MATE> so key.
Pres
s the
<GRIDUSE> so k
ey on the <ADV/
MATE> screen.
ADV------------------------------------
choose device:
FX CC DC MATE
ADV/MATE--------------------------
choose category:
HBX GRIDUSE AGS PG2
ADV/MATE/GRIDUSE---------------
griduse enable: Off
DOWN ADV OFF ON
ADV/MATE/GRIDUSE---------------
weekday 12:00A
griduse start time
DOWN UP CHANGE
NOTE: Set all the weekday and weekend timing rst before turning the GRID-USE Mode on.
e GRID-USE settings can be accessed by pressing the <DOWN> so key.
e rst GRID-USE screen to appear is the
griduse enable screen. is screen turns GRID-
USE mode ON or OFF.
is setting is the time during the week (Monday–
Friday) that a USE will be issued to the FX system,
allowing it to connect to the AC input source.
e time displayed is the default setting. To
change the time on the adj hour screen, press the
<CHANGE> so key
Weekday Grid-Use Start
To Next Page
Loading...
Need help?
General
