51
HOT KEYS
<OFF> —turns o all the FX inverters connected
to the MATE
<SRCH> —the inverter begins search mode if the
AC load connected is smaller than allowed by the
programming of the search function.
<ON> —turns on all the FX inverters connected
to the MATE.
<OK> —returns to the point in the menu system
where you entered the INVERTER CONTROL
screen.
PRESS ONCE:
INV
INVERTER CONTROL
Currently: ON
OFF SRCH ON OK
e INV “hot” key takes you to the INVERTER CONTROL screen allowing direct control of
the FX’s inverter from anywhere in the menu system.
e green LED indicator above the INV has three modes:
u Flashing—the inverter is either in the search or power save modes
u Continuously On—DC battery power is converted to AC power and the FX is supplying
loads or selling to the grid
u O—the inverter is not converting DC power to AC power or when the AC input source
is powering the loads
INV
Hot
MAIN-------------------------
1:35:04p
SUM STATUS SETUP ADV
INV Hot Key
To Next Page
Loading...
Need help?
General
