Outback MATE User Manual

95
ADV/MATE/GRIDUSE----------------
weekend 12:00A
gridusestart
DOWN ADV OFF ON
ADV/MATE/GRIDUSE----------------
weekend 12:00A
griduse stop
DOWN UP CHANGE
Weekend Grid-Use Start
is setting is the time during the weekend (Sat-
urday and Sunday) that a <USE> will be issued to
an FX system, allowing the FX to connect to the
AC input source. e time displayed is the default
setting. To change the time press the <CHANGE>
so key and adjust the time as you would for a
weekday setting.
is setting is the time during the weekend (Sat-
urday and Sunday) that a DROP will be issued
to the FX system, forcing the FXs to disconnect
from the AC input source. e time displayed is
the default setting. To change the time press the
<CHANGE> so key and adjust the time as you
would for a weekday setting.
Aer setting the START and STOP times, scroll
back to the rst GRID-USE screen using the
<UP> so key. Press the <ON> so key to activate
GRID-USE Mode.
Weekend Grid-Use Stop

Outback MATE Specifications

General

Display	LCD
Operating Temperature Range	-20°C to 60°C
Mounting	Wall Mount
Type	System Display and Controller
Communication	RS232
Communication Ports	RS232