Outback MATE User Manual

73
MAIN-----------------------------------
9:57:32A
SUM STATUS SETUP ADV
ADV/PASSWORD---------------------
enter the password
131
ENTER INC DEC EXIT
ADV/SETTINGS/WARNING
changes made could
adversely affect
system performance
ADV----------------------------------
choose device:
FX CC DC MATE
PRESS <INC> UNTIL 141 AND THEN PRESS ENTER
ADV/MATE/PG1---------------------
choose category
HBX GRIDUSE AGS PG2
ADV/MATE/AGS----------------------
choose category:
QUIET VOLT
SETUP TIME START PG2
ADV/MATE/AGS/QT------------------
weekday 12:00A
quiet time start
DOWN AGS CHANGE
Weekday Start
Go to the ADV/MATE screen and press the
<AGS> so key.
Next, press the <QUIET TIME> so key.
weekday quiet time start is the beginning of the
Monday-Friday quiet time period. Most AGS
start conditions will be stopped during this
time. <CHANGE> adjusts the hour and minutes
settings.

Outback MATE Specifications

General

Display	LCD
Operating Temperature Range	-20°C to 60°C
Mounting	Wall Mount
Type	System Display and Controller
Communication	RS232
Communication Ports	RS232