Outback MATE - Page 71

71
End of AGS SETUP
menu
UP TOP AGS
ADV/MATE/AGS/SETUP-----
cool down time 0
minutes
DOWN UP INC DEC
ADV/MATE/AGS/SETUP-----
warm up time 0
minutes
DOWN UP INC DEC
Aer the FX charging has been disabled, the cool
down time screen allows the user to adjust the
number of minutes the generator will cool down
before being shut o. is time should follow
the manufacturer’s recommendations. Press the
<DOWN> key to view the warm up time screen
e warm up time screen allow the user to
adjust the number of minutes the generator
will warm up before the FX charging begins.
is time should follow the manufacturer’s
recommendations. Press the <DOWN> key to
view the End of AGS SETUP time screen
NOTE: Cool down and warm up times are not
used when DC generator (dc genset) is selected.
In the End of the AGS SETUP screen Press
the <menu AGS> so key for more AGS
programming.
NOTE: Cool down and warm up times are not
used when DC generator (dc genset) is selected.