iii. to install PC Software
To run “VDS6000Series_PC_Software.exe” from accompanying CD which comes along with device
directly, to install PC software accordingly.
iv. to work PC Software
Via short-cut to PC software from the desktop of target PC, double-click “VDS6000 Series PC DSO” to
start the software.
v. to communicate the device with PC
The user(s) gets 2 options to communicate the device with PC: through USB communication port, or
through LAN port.
to communicate the device with PC through USB communication port
After powering the device via AC-DC adapter, its status indicator lights red for seconds.
Via USB connection cable (type-C), through matching communication interface, to connect the device
with PC. When the status indicator lights green, PC software detects effective USB port, mouse-click the
detected option to communicate the device with PC.
to communicate the device with PC through LAN port
2 solutions available to communicate the device with PC through LAN port -
Solution 1. By socket connection, upon with the combination of IP address and port, please refer to
xii. how to use socket connection from VII. Device Operation.
Solution 2. By adding LAN/LXI network device, please refer to xiii. how to use LAN communication
interface from VII. Device Operation, and xiv. how to work WiFi with PC software from VII. Device
Operation.
To Next Page
Loading...
